Updated

Free browser tool

Image to STL converter: turn a picture into a printable relief

Upload a logo, drawing or photo and get a 3D-printable STL in seconds. Choose a raised relief for signs, coasters and plaques, or a lithophane that reveals the picture when light shines through it. Everything runs on your device.

  • Free, no sign-up, no watermark
  • Your image never leaves your browser
  • Closed mesh that slicers accept as-is

For a full 3D object, such as a figurine or product: Open the AI 3D generator

Drop an image here

PNG, JPG, WebP, GIF or BMP, up to 25 MB. High-contrast pictures give the cleanest result.

Output type

A solid plate with the picture raised from the surface. Print it flat on the bed.

80 mm
2.0 mm
3.0 mm

Detail

Smoothing

3D previewProcessed on your device
Size (W × D × H)
—
Triangles
—
STL file
—
Mesh
—

How it works

From picture to print in four steps

The converter maps image brightness to height to create a relief or lithophane. Processing runs on your device without AI or image uploads.

  1. 01

    Add your image

    Drop in a logo, sketch, pet photo or family picture. A clear subject with strong contrast prints best.

  2. 02

    Pick relief or lithophane

    Relief raises the picture from a solid plate. Lithophane makes a thin panel whose thickness reproduces the image against a light.

  3. 03

    Set the size in millimetres

    Choose the width, base thickness and relief height, then check the shape in the live 3D preview.

  4. 04

    Download and slice

    Save a binary STL in millimetres and open it in Cura, PrusaSlicer, Bambu Studio or OrcaSlicer.

Relief vs lithophane

Which output should you choose?

Both start from the same picture, but they are printed and viewed in very different ways.

Which output should you choose?ReliefLithophane
Best forLogos, signs, coasters, name plates, stamps and textured wall artPhotos of people, pets and places shown as a framed panel, night light or window panel
What becomes thickerDark areas by default, or light areas if you switch it offAlways the dark areas, because thicker plastic lets less light through
Ideal imageFlat graphics, line art and silhouettes with clean edgesPhotos with a full range of tones and a well-lit subject
How to printFlat on the bed, any colour, normal infillStanding upright, white or natural filament, 100% infill
How it's seenIn normal light, from the front or at an angleOnly with a light behind it; it looks plain in normal light

Starting settings

Recommended settings for your first print

These are the tool's defaults. They work on most FDM printers with a 0.4 mm nozzle; adjust them for your printer, filament and the size of your picture.

SettingReliefLithophaneWhy
Width80 mm100 mmLarger prints show more detail. Depth follows the image's aspect ratio.
Base / thinnest point2 mm0.8 mmKeeps the plate rigid; for lithophanes it sets how bright the white areas glow.
Relief height / extra thickness3 mm2.4 mmMore height means more contrast. Lithophanes rarely need more than about 3 mm in total.
DetailStandardFineFine adds triangles and file size; most nozzles can't print finer than about 0.4 mm anyway.
Layer height (in your slicer)0.2 mm0.12–0.16 mmThinner layers reproduce smoother tones in a lithophane.

Tip: print a small test at 50 mm wide before committing to a large panel.

Image tips

Pictures that convert well

The converter turns brightness into height, so what matters most is contrast rather than resolution.

  • Use strong contrast

    Black-on-white logos and line art give crisp reliefs. Faded or low-contrast photos come out flat.

  • Remove busy backgrounds

    Crop tightly around the subject. Transparent PNG backgrounds stay at the base height automatically.

  • Light faces evenly

    For lithophanes, avoid harsh shadows across faces; they turn into thick, dark patches.

  • Don't worry about megapixels

    The image is resampled to at most 400 points across, so a 1000 px picture is plenty.

  • Smooth out noise

    Raise smoothing for compressed JPGs or grainy photos; lower it to keep sharp text edges.

Is it the right tool?

What this converter does, and what it doesn't

The converter turns the brightness of a picture into height. That makes it great for some jobs and the wrong tool for others.

Use it for

  • Raised reliefs from logos, drawings and silhouettes for signs, coasters and plaques
  • Backlit lithophanes from photos, with size and thickness set in millimetres
  • Free, unlimited STL downloads with no sign-up; the picture stays on your device
  • A closed, watertight binary STL in millimetres that common slicers open without scaling

Not for

  • A full 3D object you can see from every side, such as a figurine, character or product: the Hello 3D image-to-3D studio does that and uses credits
  • Exporting 3MF, OBJ or GLB directly: it downloads STL; save it as 3MF from your slicer
  • Curved, cylinder or full-colour lithophanes: panels are flat and single-colour
  • Turning a technical drawing into a dimensioned CAD part: height follows brightness, not measurements

FAQ

Image to STL questions

Answers about converting pictures to STL files for 3D printing.

Sources

Defaults, ranges and detail levels come from the converter's own code. The lithophane layer height and thickness advice comes from these guides, checked on Nov 8, 2026.

What changed on this page

  1. Added what the converter does and doesn't do, the sources behind the print advice and this change log.

  2. First published: the relief and lithophane converter, settings and image tips. The Hello 3D sample now loads by default.

Need a full 3D model?

Turn a photo into a complete 3D object

This converter makes a relief: the front of your picture, raised from a flat plate. To get a full object you can see from every side, such as a figurine, character or product, use the Hello 3D AI image-to-3D studio. It exports STL and 3MF for printing, plus GLB, GLTF, FBX, OBJ and USDZ.

Open the 3D studio

AI generation uses credits; this relief converter stays free.